Steps to stick Iron Heat Transfer Vinyl (HTV) onto a T-Shirt

1. Preheat Iron: Set to cotton setting, no steam.
2. Prep T-Shirt: Place on a flat surface and pre-iron the area for 5-10 seconds.
3. Position HTV: Do not remove the logo from the transparent sheet. Place the logo   with the transparent sheet on the t-shirt such a way that you can read the logo.
4. Press:  Press with firm pressure for about 15 seconds. You don’t need a parchment paper or a Teflon sheet as the transparent plastic already stuck to the logo will do this job.
5. Check & Peel: Let cool briefly, then peel off the carrier sheet. Repress if needed.

Steps to Wash a T-Shirt with HTV

1. Wait: Don’t wash for 24 hours after application.
2. Wash Inside Out: Use cold water, gentle cycle.
3. Avoid Harsh Chemicals: No bleach or fabric softeners.
4. Air Dry: Prefer air drying, or use low heat in the dryer.
5. Iron Carefully: If needed, iron inside out or with a protective cloth.